Chromatography Autosampler Vials Only
Waters Corp Clear Glass 15 x 45 mm Screw Neck Total Recovery Vial, 100/pk
Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry.
Waters Corp LCGC Certified Clear Glass 12 x 32 mm Screw Neck Max Recovery Vial with Cap and PTFE/Silicone Septum, 2 mL Volume, 100/pk
Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry.
Trajan Scientific Vial LC/GC Screw Clear 2mL, 12x32mm, 100 Pack
L-MARK Brand Vial Standard 10mm Screw 2mL 12x32mm 100 Pack
Trajan Scientific Amber QsertVial Screw With Fused 300l insert, Kit Pack
Kit Pack. QsertVial, 12x32mm, Screw, Amber With fused 300µl insert, pre-slit, PTFE/Silicone, Blue QuikCap, 100 Pack
Waters Corp Clear Glass 12 x 32 mm Snap Neck Vial, 2 mL Volume, 100/pk
Waters offers a selection of snap cap vials and snap caps/septa.
Waters Corp Amber Glass 12 x 32 mm Snap Neck Vial, 2 mL Volume, 100/pk
Waters offers a selection of snap cap vials and snap caps/septa.
Microsolv Technology Corporation Vials, Screw Top, Glass. Clear, 2ml, 10-425mm threads, 12x32mm outer dimensions. For use as an autosampler vial or storage bottle. 100/PK.
First hydrolytic, Class A, Type N51A pharmaceutical grade, Borosilicate Deactivated / Silanized Glass. Features a wide mouth opening for easy filling and ND10 threads.
Microsolv Technology Corporation Vials, Snap Top, Glass. Clear, 2ml, with Write-On Patch and fill lines. Deactivated. An 11mm snap-ring and 12x32mm outer dimensions. For use as an autosampler vial. 100/PK.
First hydrolytic, Class A, Type N51A pharmaceutical grade, Deactivated / Silanized, Borosilicate Glass. Features a wide mouth opening for easy filling. Write-On Patch and fill lines are epoxy paint for reduced smearing.
Grainger Crimp Fitting 3/8 I.D. M22-1.5 F Metric
The Crimp Fitting 3/8" I.D. M22-1.5 F Metric is a brass compression fitting with a 3/8" inner diameter and M22 x 1.5 female metric thread. It is made of forged brass and is nickel plated. The fitting accepts 3/8" OD tubing and is designed for use in hydraulic and pneumatic applications. It provides a leak-proof connection by compressing a sleeve against the tubing when tightened. The maximum operating pressure is 5000 psi and the maximum operating temperature is 232°C. This metric compression fitting allows easy installation by hand tightening.
Grainger Crimp Fitting 3/8 I.D. M16-1.5 M Metric
The Aeroquip 16P845 hydraulic crimp fitting is made of steel and has a 1/4" NPTF thread. It is designed for use with 1/4" OD tubing and has a working pressure of up to 5000 psi. The fitting has a hex nut for tightening and can be reused. It requires a hex crimping tool to properly secure tubing. This fitting allows easy assembly of hydraulic lines using crimp technology.
Grainger Crimp Fitting 1/4 I.D. M14-1.5 M Metric
The Grainger 16P843 is a 3M Scotch-Brite General Purpose Hand Pad that features an open web construction with non-scratching fibers for cleaning and scouring. It has a 6 inch by 9 inch size and comes in a pack of 10 pads. The pads are made in the USA and can be used for a variety of cleaning applications including pots, pans, dishes, walls, floors, grills and more. The open web design allows debris to move through the pad during cleaning.
Grainger Crimp Fitting 3/8 I.D. M18-1.5 M Metric
The Aeroquip Hydraulic Crimp Fitting is a steel hydraulic fitting that uses crimp technology for hose connections. It has a working pressure of up to 5000 PSI and a temperature range of -40°F to +250°F. The body is made of carbon steel with a zinc dichromate finish. It is available in sizes -04 through -32 to accommodate a wide range of hose diameters. This fitting allows quick connect and disconnect of hydraulic hoses without thread damage. It requires a hex crimping tool to secure the hose. The compact design provides a reliable seal while minimizing space requirements.